You opened a tab in the WebChange Detector plugin and wonder what a switch does, or you look for a setting and don’t know where it lives. This page walks through every screen of the plugin in the order of the menu in wp-admin, and says for each setting what it does and when you would change it.
It’s a reference, not a how-to. Each section links to the tutorial that explains the job step by step. New to the plugin? Start with Start with the plugin for WordPress. You don’t have the plugin yet? Get it from wordpress.org.
Before you connect: create an account or paste a token
Until the plugin is connected to an account, WebChange Detector in the wp-admin menu shows one screen with two ways in.
- Create Free Account 1: a form with First Name, Last Name, Email and Password, pre-filled from your WordPress user. Use it when you have no account yet. After you send it, the screen changes to Account Activation Required: click the link in the email, come back and reload.
- Use Existing API Token 2: paste the API token of an account you already have and click Save. Use it for a second website, or when your agency gave you a token.
- Reset & Start Over: shown on the activation screen. It takes you back to the form, for example when you mistyped your email address.
Step by step: Create your account.
Once connected, the WebChange Detector menu has these entries: Dashboard, Checks, On-Demand Checks, Monitoring, Logs, Settings, AI Rules and, at the bottom, Upgrade Account. If one of them is missing on your site, your agency or network admin switched it off. See When a tab is missing.
Dashboard
The Dashboard answers two questions: how many checks will this month use, and did anything change lately.
- Plan and usage bar 1: your plan, the checks used, the checks we expect you to use until renewal (“more expected”) and the days until renewal. Below it the forecast is split into Monitoring and Auto Update Checks. The button reads Manage plan, or Upgrade Plan → when the forecast is higher than your plan. How the numbers are counted: What a Check Costs.
- Monitoring card, the first of the three cards 2: the URLs monitored, the expected checks per month and the schedule. Manage monitoring → opens the Monitoring tab.
- Auto Update Checks card: the most checks it can use per month and the active days. It warns you with “No alert email set” when nobody would be told about a change. Manage Auto Update Checks → opens the settings.
- On-Demand card: the URLs selected and how many checks one On-Demand Check costs with that selection. Take an On-Demand Check → starts one.
- Latest Detected Changes and Recently AI-Cleared: the newest checks that need a look, and the ones our AI classified as harmless.
- Getting Started: Start the tour → runs the guided tour through the plugin again, Read the tutorial opens the written guide.
- Checks and Developer API: shortcuts to the Checks tab and to the API documentation.
On a Multisite in “All Websites” mode the two change lists are hidden, because they belong to one website.
Checks
Every check the plugin ran for this website, newest first. A run that checked several pages at once is shown as one group with a summary by our AI, marked Needs Attention or Looks Good.
- Date Range: 7 Days, 30 Days, 90 Days, All Time or your own from and to date. Widen it when you look for an older check.
- URLs: limit the list to single pages. Handy when a client asks about one page.
- Status: New, OK, To Fix, False positive. Filter for New to see what nobody looked at yet.
- Visual Changes: All results or With changes only. The second hides everything that stayed the same.
- Check type: All Checks, Monitoring, On-Demand Checks or Auto-Update Checks.
- Reset: clears all filters.
- Batch View 1 and List View: grouped by run, or one flat list of pages.
Open a group to see its AI Summary 2 and its pages with the status 3, the compared screenshots and the difference. Failed Checks inside a group lists the pages that could not be captured, each with its error message. An Auto Update Check also shows which plugins, themes or core version were updated, with View Full Update Details.
How to work through the list: How to Review Checks.
The comparison view
Click a check to open it on its own page.
- Status 1 with Change Status to: sets the check to OK, To Fix or False positive. Set it once you decided, so the check drops out of the New filter.
- Public link 2: a link you can send to a client. Whoever has it can see this comparison without logging in.
- Screenshots: the before and after images. Drag the slider to compare, or switch between Before <-> Change and Before <-> After.
- AI Change Analysis 3: every changed region with a verdict (Alert, Unsure or OK) and a short reason. Ignore in future creates a rule for this kind of change. You choose where it applies: Only this URL, all URLs of the group or the whole website.
- Visual Changes: the share of the screenshot that differs, and the threshold if one is set.
- Browser Console: JavaScript errors that appeared or disappeared between the two screenshots, each with its own Ignore action.
- Previous and Next: jump to the neighbouring check without going back to the list.
AI analysis and the browser console are part of some plans only; where they are not included, the panel shows an example and an Upgrade Plan button. See pricing. More on the verdicts: AI change analysis. More on console entries: Catch Broken JavaScript.
On-Demand Checks
This tab holds three things: the settings for Auto Update Checks and On-Demand Checks, the list of pages to check, and the On-Demand Check itself. The bar at the top (Selected URLs, Active Days, Time Window) tells you whether Auto Update Checks are armed and when the next one is due.
Auto Update Checks settings
- Auto Update Checks 1: the main switch. On means: every time WordPress installs updates by itself, the plugin takes screenshots before and after and compares them. Switch it off on a site where you install every update by hand.
- Auto Update Timeframe: the hours in which WordPress may install updates. Pick a time with few visitors and when somebody can react.
- Weekdays: the days on which updates may run. On a new site Monday to Friday are on, Saturday and Sunday off. Switch days off when nobody is there to fix a broken page.
- Always allow WordPress core security updates: on by default. WordPress security releases are installed right away, even outside your timeframe, and without checks. Switch it off if you want every update to wait for the timeframe.
- Notification email to: who hears about an Auto Update Check. On a new site this is the WordPress admin email address. Several addresses are separated by commas.
- Currently enabled auto-updates: a read-only list of what WordPress updates by itself on this site (core, plugins, themes).
- Re-enable WP auto updates: appears only when something else (your host, another tool) switched WordPress auto updates off. Use it with care: if another tool manages updates on purpose, two update mechanisms would compete.
Step by step: Auto Update Checks.
Settings for On-Demand Checks
- Alert emails for On-Demand Checks: these addresses get an email when an On-Demand Check finds a change. Leave it empty for no email.
- Difference Threshold: changes below this percentage are not reported.
- Activate newly synced URLs by default: with Desktop or Mobile ticked, pages that are added later are selected for checks right away. Tick it when every new page should be covered; leave it off to keep your number of checks under control.
- Advanced screenshot settings, CSS Settings and JS Settings: see Advanced screenshot settings.
- Save Settings: nothing is stored before you click it.
Select URLs to Check
The table lists the pages WordPress knows. Currently selected URLs 1 counts what is on. For every page you switch Desktop 2 and Mobile 3 on or off. One page on one device is one check.
- Post types and Taxonomies with Filter: show one content type, for example pages only.
- Search: find a page by its title or address.
- Select all: switches every page in the current view on or off for one device.
- Missing URLs?: other post types and taxonomies are added under Settings.
Step by step: Choose the pages to check.
Running a check
Start On-Demand Checks leads through the tiles Settings, Pre-Update and Post-Update.
- Take Pre-Update Screenshots: captures the “before” state. The line above the button says how many checks the run will use.
- Time For Updates: the screenshots are saved, now make your changes. You can leave the page.
- Create Checks: captures the “after” state and compares. While it runs you see In queue, Processing, Completed and Failed.
- Start a new check takes you back to the settings for the next round; the finished run stays in your history. Check again retakes the “after” screenshots against the same “before” screenshots, for when you fixed something.
- Cancel On-Demand Checks: stops the workflow and returns to the settings.
Step by step: On-Demand Checks in the plugin for WordPress.
Monitoring
The Monitoring tab 1 checks your pages on a schedule, without anyone clicking, and tells you when something changed.
- Enable Monitoring: the main switch.
- Run in intervals: Every day, Specific weekdays, Specific days in month (including Last day) or Never. Choose weekdays or days of the month for sites that rarely change.
- Interval in Hours: how often a day the check runs, from every 24 hours down to every hour. Every 15 and 30 minutes are part of higher plans. A shorter interval finds a problem sooner and uses more checks.
- Hour of the Day: when the daily run starts.
- Check when a page is saved: a few minutes after a published page is saved with changed content, only this page is checked. Good for sites where editors work every day. See Check a page when it is saved.
- Quiet Hours: no checks in this time. Use it to save checks at night.
- Difference Threshold and Activate newly synced URLs by default: as on the On-Demand Checks tab, but stored for Monitoring.
- Alerts: the email addresses that are told about changes found by Monitoring.
- Advanced screenshot settings, CSS Settings and JS Settings: see the next section.
- Run monitoring now 2: runs Monitoring once, right away. See Run Monitoring Now.
Below the settings is the same page table as on the On-Demand Checks tab, with its own selection. A page can be monitored without being part of your On-Demand Checks, and the other way round.
Step by step: Set up Monitoring in the plugin for WordPress. All schedule options in detail: Monitoring settings reference.
Advanced screenshot settings
The same block appears on the On-Demand Checks tab and on the Monitoring tab. Each tab stores its own values, so set them in both places if both should use them.
- Basic Authentication: Username and Password for a site behind a browser password prompt, such as a staging site. To remove a stored password, clear the field and save.
- Static IP Proxy: with Enable Static IP Proxy on, our screenshots come from one fixed IP address, shown next to the switch with a copy button. Switch it on when your firewall or host blocks us and you can allow a single address.
- Screenshot Region: Auto-Detect, United States or Europe. Choose a fixed region when your site shows different content per country, or when the data should stay in one region.
- Screenshot Delay: the pause between the starts of two screenshots, in seconds. The default is 10, and you can raise it up to 60. Raise it when your server struggles with many page loads in a row.
- CSS Settings: CSS that is applied before the screenshot. Use it to hide things that change on every visit, such as a banner or a counter.
- JS Settings: JavaScript that runs before the screenshot, for example to close a popup.
When to use which: My Check Shows Changes I Do Not Care About and A Screenshot Failed or Looks Wrong.
Logs
Three tabs for looking behind the scenes.
- Queue: every screenshot and check job with Page & URL, Type, Status and the time it was added and updated. Look here when a check seems stuck.
- Auto-Update History: one entry per automatic update run, marked Completed, Completed with Errors or Failed, with the updated plugins, themes and core version and a link View Visual Comparisons. An entry can also say why nothing ran, for example Auto-Update Cooldown Active or WP Auto Updates Disabled.
- Debug Logs: a technical log, empty unless debug logging is on. Filter by Level, Context, message and date, download it with Export to CSV, or empty it with Clear All Logs.
More on the history: Auto Update Checks history.
Settings
- Show Post Types 1 and Show Taxonomies: add more content types (posts, products, categories, tags) to the page tables. Add only what you want to check; every type makes the list longer.
- URL Sync Status 2: shows the Last Sync. The plugin keeps the page list up to date in the background. Sync URLs Now does it at once, for example right after you published a new page.
- Disable Admin Bar Menu 3: hides the WCD entry in the admin bar on the front end. The menu is shown unless you tick this.
- Enable Debug Logging: off by default. Switch it on when our support asks for logs; they show up under Logs and are removed after 30 days.
- Account Information: your Email and API Token.
- Reset API Token: disconnects this website from the account. Your scheduled checks keep running and your settings come back when you enter the same token again.
- Delete Account: there is no delete button in the plugin. See Plans, upgrades and billing.
- Need more checks?: the Upgrade button opens your plan page.
Keeping the page list current: Keep Your Page List Up to Date.
AI Rules
The list of rules that tell our AI which changes to ignore. Rules are not created here: you create them in the comparison view with Ignore in future.
- Description, Scope, URL, Group / Website, Created and Matches show what a rule covers and how often it was used.
- The switch in front of a rule 1 turns it off without deleting it.
- The scope 2 can be widened from This URL to all URLs of the group or of the website.
- Delete rule removes it for good.
Step by step: Create a rule in wp-admin.
Upgrade Account
The last menu entry opens your plan page in the browser, already signed in. There you change your plan, see your invoices and edit your account details. Everything on that page: Plans, upgrades and billing.
While you are logged in and look at your site’s front end, the admin bar has a WCD entry for the page you are on.
- On-Demand / Auto Update Checks: switches for Desktop and Mobile.
- Monitoring: switches for Desktop and Mobile.
- Dashboard: opens the plugin.
- “URL not tracked by WCD” means the page is not in your page list yet.
Step by step: Add a page from the front end.
Network admin on a Multisite
On a network-activated Multisite, the network admin has two more entries.
- Sites: all sub-sites with Registered or Not Registered. Register connects one sub-site, Register All Unregistered Sites all of them.
- Sub-Site Allowances: decides what the admins of a sub-site can see and do. Defaults for new sites are applied to every sub-site that is registered later.
- Sub-Site Selection: on the other tabs, the Site dropdown picks the sub-site you manage. All Websites applies what you save to every registered sub-site.
Step by step: WordPress Multisite.
An agency can limit what a client sees in the plugin, from the Web App or, on a Multisite, from Sub-Site Allowances. The switches are the same in both places.
- Show plugin in WP admin (menu + admin bar): off hides the whole plugin. URL sync, Auto Update Checks and Monitoring keep running.
- Tabs in WP Plugin: one switch for each of the views On-Demand Checks, Monitoring, Checks, AI Rules, Settings and Queue (the Logs tab).
- On-Demand Checks: whether the client may start checks, see the settings and see the page list.
- Monitoring Checks: whether the client sees the settings and the page list.
- Other Settings: show the post types and taxonomies in Settings, show the account settings, Allow upgrading account, Start the wizard and Allow only checks for frontpage.
Step by step: Control What Your Client Sees.